ELECTRICAL 4 - 3 CX EXCAVATORS ELECTRIC / HYDRAULIC CONTROL Operation Function Explanation Pump Control 1) In S, H and Auto work modes current supplied to the Electro-magnetic proportional valve built into the pump, will control the HP requirement of hydraulic pumps P1 and P2. See pages 24-25 Power Boost 1) Increases hydraulic power when more force is required for digging operations. 2) When activated in H, S and Auto work modes main relief pressure is increased for 8 seconds. 3) Operates full in the L mode. See pages 26-29 2-Speed Travel 4) High and Low speed travel operation is obtained by switching drive motor swash plate angle.
See pages 30-31 Cushion (on/off) 1) Controls the pilot oil of the boom and arm spools. 2) The operator can turn off this feature. 3) Each time the machine is started, it will be in Cushion on. See pages 32-33 Swing Brake/ Swing Lock and Free Swing 1) The mechanical swing brake will apply 5 seconds after the swing hand control is returned to neutral. 2) When swing lock is selected the brake will apply and the swing control spool will be hydraulically locked in neutral. 3) When free swing is selected the brake will be released and an orifice in the motor circuit will allow the upper structure to drift.
See pages 34-39 Lever Lock 1) Pilot pressure can be disabled by raising the gate lever handle or raising the left console. See pages 40-41