HYDRAULICS – CX130/CX160 5 - 3 CX EXCAVATORS ATTACHMENT Operation Function Explanation Boom Raise 1) With boom up only operation two pump flows inside the control valve are combined, when the boom1 and boom2 spools are shifted. See pages 24-25 Boom Lower 1) When a built-in anti-drift valve in the control valve is opened and boom1 spool is shifted, the boom can be lowered. 2) Only one pump flow is used. 3) A regeneration circuit inside the control valve provides additional speed and prevents cavitation. See pages 26-27 Arm Open (Out) 1) With arm only operation two pump flows inside the control valve are combined, when the arm1 and arm2 spools are shifted.
See pages 28-29 Arm Close (In) 1) With arm only operation two pump flows inside the control valve are combined, when the arm1 and arm2 spools are shifted. 2) When a built-in anti-drift valve in the control valve is opened and arm1 spool is shifted, the arm can be closed. 3) A regeneration circuit inside the control valve provides additional speed and prevents cavitation. See pages 30-31 Cushion “ON” Operation (Boom & Arm) 1) As a control spool returns to neutral (center) position, the pilot oil must return through an orifice in the cushion valve. 2) The slow movement of the spool provides the cushion feature. 3) The Cushion only occurs in the boom and arm circuits.
See pages 32-35 Cushion “OFF” Operation 1) When the cushion solenoid is energized pilot pressure is sent to the cushion valve, the orifices are shifted out of the circuit and the cushion feature will not function. See pages 36-37