ce t — cxsec5.pdf

HYDRAULICS – CX130/CX160 5 - 4 CX EXCAVATORS FEATURES Operation Function Explanation One Touch Power boost 1) When the Power boost button is pressed, the power boost solenoid is energized and the main relief pressure will be raised approximately 8%. 2) This power boost increase will occur for 8-second intervals. 3) Power boost in on full time in L mode See pages 38-39 Main Relief Valve The Main Relief has two adjustments:

1) Standard Main Relief pressure 2) Power Boost Pressure See pages 40-41 Neutral pump Destroke (negative flow control) 1) If the flow output of P1 or P2 hydraulic pump is not needed the output is kept at a minimum flow rate (negative control flow rate), and energy consumption is reduced. See pages 42-43 Free Swing Operation 1) An orifice leak is opened between the A and B ports of the swing motor. This will provide smoother starts and stops of the swing during hoisting operations. See pages 44-45 OPTIONS Operation Function Explanation Auxiliary hydraulic kits There are three auxiliary hydraulic options.

1) Hammer kit (one direction, one pump flow) 2) Multi-kit (two direction or one direction flow, one pump or two pump flow) 3) Thumb Kit (two direction, one pump flow) See pages 46-47