ce t — cxsec6.pdf

HYDRAULICS – CX210/CX240 6 - 2 CX EXCAVATORS TRAVEL Operation Function Explanation Low Speed Travel 1) The swash plate angle of the travel motors is shifted to maximum angle. See pages 6-7 High Speed Travel 1) The Travel Speed solenoid is energized and the swash plate angle of the travel motors is shifted to minimum angle, high-speed travel occurs. 2) The travel motors will switch to low-speed automatically when the travel pressure reaches approximately 4200 psi and switches back to high- speed when the travel pressure is reduced.

See pages 8-11 Straight Travel 1) When performing travel operation + attachment operation or travel operations + swing operation, one pump is dedicated to the travel motors. The other pump will supply oil to the other functions. See pages 12-15 SWING Operation Function Explanation Swing Operation with Brake 1) Only one pump is used for swing operation. 2) The upper structure is braked hydraulically when the supply and return ports are blocked at the control spool. A crossover relief built-in to the swing motor protects the swing motor from pressure spikes. 3) Swing mechanical brake is applied 5 seconds after swing lever is returned to neutral position.

See pages 16-19 Swing Lock 1) When the Swing Brake switch is pressed the Swing Brake solenoid is energized and the brake is applied. 2) The Swing Shutoff solenoid is energized and the swing control spool is locked in neutral. See pages 20-21 Swing Priority 1) When swing and arm is used at the same time swing supply will have priority over arm. See pages 22-23