ce t — FAULT CODE LISTING

CX210/CX240 ELECTRONIC FUEL SYSTEM 8 - 21 CX EXCAVATORS FAULT CODE LISTING Fault Associated Hardware Reason Effect (only with active code) F284 ESS crankshaft position sensor low. Low voltage at pin 8 of engine harness. ECM will use injection pump speed as back up. Possible white smoke and power loss. F319 ECM Power to real time clock has been interrupted or is no longer valid. Time stamp in ECM power down data will be incorrect F352 Sensor voltage supply Low voltage at engine speed sensor +5 VDC at pin 10 of engine harness. Default value is used. Engine power will de-rate to no boost fueling and loss of protection for oil pressure, intake boost pressure and intake air temp.

F361 VP44 fuel system high current. High current at the VP44 pump control valve. Fueling to injectors is stopped and engine shuts down. F362 VP44 fuel system open Low or no current at the VP44 pump control valve. Engine will lose power and may shut down. F363 VP44 fuel system feed back error. No fuel control valve movement detected by the controller. Engine power loss. F364 VP44 fuel system communication error No communication or invalid data transfer on data buss between ECM and FPCM at pins 4 and 13 of engine harness. Engine will run at back up mode set speed when throttle is off idle. F365 VP44 fuel system low Low voltage at VP44 controller supply voltage circuit.

Engine may lose power and may shut down. F366 VP44 fuel system measuring error Fuel pump controller voltage not within 6 to 24 VDC. Engine will lose power and may shut down.