SECTION 4 OPERATING Page 40 OPERATING TECHNIQUES prior to normal ripping operations operate the ripper at low depth for a couple of minutes to warm shank bits. protect shank and bits when parking the machine. 4.20. ECONOMICAL OPERATION OF THE MACHINE Fuel consumption during operation of the dozer depends on many factors as: engine characteristics, load, terrain, operator’s skill and experience, manner of operation. Relatively of fuel consumption is quantity on moved material per unit of consumed fuel. To reach the most favorable value of this ratio observe the following principles of dozer operation: Avoid long distance transporting of material.
Loading and pushing of material must be performed at gear which ensures maximum drawbar pull (1 st or 2 nd gear) with high blade fill ratio without loosing material in blade. Reverse travel at top gear but keep engine speed above medium, not maximum. Avoid stopping machine due stall of the engine. Avoid track slippage. For digging hard material pitch the blade forward, for transportation of material pitch the blade backward. TD-40C DRESSTA