DRESSTA Co. Ltd. TD-40C98/1E — 5.6. AIR CLEANING SYSTEM

SECTION 5 MAINTENANCE Page 16 5.6. AIR CLEANING SYSTEM Fig. 5.2. Air Cleaner Assembly 1. Body 2. Safety Element 3. Primary Element 4. Washer 5. Wing Nut 6. Slotted Nut 7. Cotter Key 8. Cover 9. Gasket 3. Check the condition of the gasket on the end of the outer element (3). If the gasket is damaged or missing, replace the primary element. Remove all dirt from inside the air cleaner body with a damp cloth. A small amount of nonsudsing detergent added to the water will remove the soot. Washing IMPORTANT: Never wash element in fuel, oil, gas or solvent. DO NOT OIL ELEMENTS. Do not tap the element against a hard surface; this will damage the element. 1.

Carefully tap the side or end of the element against the palm of your hand to remove loose dust. 2. Wash the element in clean, warm water 20°C to 40°C. A small amount of nonsudsing detergent added to the water will remove the soot. 3. Rinse the element in clear water (if a hose is used, do not exceed 275 kPa). Shake the element carefully to remove excess water. TD-40C DRESSTA