Komatsu — OPERATOR SEAT

Operation - Section 3 02/99 OM3013 Page 3-22 Operating Instructions 4. After material being dumped clears body, move dump lever to the lower position and dump body will start to move down. 2. Thigh Adjustment Knob: The thigh adjustment (2) has two positions: First position is horizontal; Second position is one turn of the knob and front section of the seat rises approximately 15 °. Turn knob in reverse direction to return seat to the horizontal position. 5. After lowering the dump body a certain distance, move dump lever to the FLOAT position. Release the lever and it will return automatically to the FLOAT position. The body will move down under its own weight. 3.

To adjust the Forward - Backward location of the seat: Move lever (3) out to the left, slide the seat for- ward or backward as desired to the best posi- tion then release the lever. The seat will lock and remain in this position. 4. Back Tilt Control Lever: NOTE: When traveling, always set the dump lever at the FLOAT position, regardless of whether or not the truck is loaded. If the transmission range selector is moved to any position other than "N" (neutral) when the dump lever is not at the FLOAT position, the central warning lamp will light up and the alarm buzzer will sound. Pull up on lever (4), move seat backrest to the angle position desired and release lever. 5.

Lumbar Support Adjustment Control: Turn lumbar control knob (5) one turn, this will move lumbar cushion to the out setting. This will provide added support to the lower back. Turn knob in the reverse direction the seat will return to the normal position. 6. Release Parking Brake Valve Lever. SAFETY LOCK Move hinged lock around dump lever. This device locks the dump lever in the HOLD position. When carrying out inspection on the machine with the body raised, always lock the dump lever in the HOLD position, and then install the body up safety pins. OPERATOR SEAT The operator's seat is a fully adjustable for the driver’s comfort and ease of operation.

The seat is independently mounted from the cab for easy main- tenance and repair. Adjustments must be made while sitting in the seat: FIGURE 3-3. OPERATOR SEAT 1. Weight Adjustment Knob: Pull crank handle out of knob (1, Figure 3-3) and hold crank down, turning crank clockwise decreases cushioning effort of seat and turning counterclockwise increases cushioning effect. The weight adjustment knob range of operation is 19.5 - 20.5 turns. Release crank handle and fold handle to stow position. 1. Weight Adjustment Knob 2. Thigh Adjustment Knob 3. Forward-Backward Adjustment Lever 4. Back Tilt Control Lever 5. Lumbar Support Adjustment Control