Maintenance - Section 4 OM4010 05/07 Page 4-4 Lubrication and Service 10 HOUR (DAILY) INSPECTION (continued) 5. Check air cleaner service indicator (1). If the RED area is showing the air filters must be cleaned or replaced before operating the truck. Push the indicator reset button to return the red piston to its normal position. 6. Steering, Hoist Oil Tank - Check oil level (1) in tank, oil should be visible in the center portion of the sight glass. Add oil as necessary. Refer to Lube Key C. Refer to Hydraulic Tank Service in this section. 7. Rear Brake Cooling Oil Tank - Check oil level (2) in tank, oil should be visible in the center portion of the sight glass. Add oil as necessary.
Refer to Lube Key E. 8. Fuel Tank - Inspect fuel gauge (2) and note the quantity indicated. Compare this indication against the fuel gauge reading on the instrument panel in the opera- tor’s cab. Fill tank (cap, 1) as required. Tighten cap securely after filling the tank. 9. Differential - Truck should be on level surface, oil level should be even with the plug. Add oil as necessary. Refer to Lube Key B. 10. Check final drive housing breather. Clean or replace breather, if obstructed. Check for leak- age around final drive housing and oil disc brake housings and the hoses connected to the housings. COMMENTS CHECKED INITIALS