Komatsu — 500 HOUR SERVICE

Maintenance - Section 4 OM4010 05/07 Page 4-10 Lubrication and Service 500 HOUR SERVICE In addition to the 250 hour lubrication and inspection schedule, perform the following: Truck Serial Number ________________________ Site Unit Number ____________________________ Date: __________ Hour Meter _________________ Name of Service Person ______________________ 1. FAN BELT - Check for alignment, condition of belt, and proper tension. Refer to Section C, Engine and Cooling Sys- tem. 2. RADIATOR FINS - Inspect radiator for restric- tions or damaged fins. Notify the proper mainte- nance authority if discrepancies are found. 3. TRANSMISSION OIL FILTER - Remove and replace filter element.

Refer to Transmission Fil- ter, page 4-18 . 4. FRONT DISC BRAKE - Measure disc pad for wear and proper thickness. Refer to Section J, Brake Circuit Checkout and Adjustment , for specifications and limits. 5. ENGINE - Refer to the engine manual for oil recommendations and capacity. - change engine oil - change engine oil filter elements (Figure 4-1). 6. - FUEL FILTER - Remove and replace two fuel filter elements (2, Figure 4-2). 7. CORROSION RESISTOR - Remove and replace two corrosion resistor elements. 8. BY-PASS FILTERS - Remove and replace two engine by-pass filter elements. (1, Figure 4-2) FIGURE 4-2. FILTERS - Upper Left Front of Engine FIGURE 4-1.

LUBE OIL FILTERS Upper Right Front of Engine 1. Engine Oil By-Pass Filters 2. Fuel Filters COMMENTS CHECKED INITIALS