Komatsu — Check Coolant Level, Add Coolant

OPERATION Check Coolant Level, Add Coolant Do not open the radiator cap unless necessary. Wait for the engine to cool down before checking the coolant in the subtank. The coolant remains at high temperature and the radiator is under high internal pressure immediately after the engine has stopped. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wait for the temperature to go down and then turn the cap slowly to release the pressure before removing it. When adding coolant, use the step and handrail on your machine to support yourself securely. 1.

Check that the cooling water level is in the range between the FULL and LOW marks on sight gauge (G) of the subtank. If the water level is low, open the cover at the top of the platform and add water through subtank filler port (1) to the FULL level. 2. After adding coolant, tighten the cap securely. 3. If the subtank is empty, check for water leakage. After checking, fill the radiator with water and then fill the subtank with water. If the volume of coolant added is more than usual, check for possible leakage. Confirm that there is no oil in the coolant. 2-46 WA500-3LK