Komatsu — Check Fuel Level, Add Fuel

OPERATION Check Fuel Level, Add Fuel When filling with fuel, never let the fuel overflow. This may cause a fire. If too much fuel is added, there is danger that the fuel may expand because of the rise in the ambient temperature and cause the fuel to overflow. Spilled fuel may cause a fire. Always wipe off any spilled fuel completely. Fuel is highly flammable and a dangerous substance. Never bring fire or flames near fuel. Remark If the engine has run out of fuel and has stopped, it is necessary to operate the priming pump to bleed the air completely from the fuel line before starting the engine again.

See “Replace Fuel Filter Cartridge” on page 3-55 for instructions on using the priming pump. Be careful not to let the engine stop because of lack of fuel. If the engine has run out of fuel, the air bleeding operation can be carried out more quickly when the fuel tank is full. 1. Turn the engine starting switch to the ON position and check the fuel level with fuel level gauge (G). 2. After checking, turn the switch back to the OFF position. 3. After completing operations, add fuel through fuel filler (F) until the fuel tank is full. For details about opening and closing the cap, see “Cap with Lock” on page 2-32. 4. After adding fuel, tighten the cap securely. Fuel capacity: . . . . . . . . .

. . . . . . . . . . . . . 450 liters (118.9 US gal) 2-48 WA500-3LK