Komatsu — Final Checks Before Starting Engine

3. Lower the bucket to the ground and check that work equipment control lever (3) is locked by safety lock lever (4). OPERATION 4. Insert the key in starting switch (5); turn the key to the ON position; and check that the machine monitor system works. When the starting switch is at the ON position before starting the engine, all monitors, gauges, and central warning lamps will light up for approximately three seconds. The alarm buzzer will sound for one second. When this happens, 88 is displayed on the speedometer and 8 is displayed on the transmission shift indicator. If any monitor lamps do not illuminate, there is probably a failure or disconnection.

Contact your Komatsu distributor for inspection. WA500-3LK 2-55