OPERATION Starting Engine Normal Starting Sit down in the operator’s seat before starting the engine. Do not attempt to start the engine by short-circuiting the engine-starting circuit. Such an act may cause serious bodily injury or fire. Check that there are no persons or obstacles in the surrounding area and then sound the horn and start the engine. Never use starting-aid fluids as they may cause an explosion. Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure good ventilation. 1. Turn the key in starting switch (1) to the ON position. Remark Do not keep the starting motor rotating continuously for more than 20 seconds.
If the engine does not start, wait for at least two minutes before trying to start the engine again. Do not accelerate the engine suddenly before completing the warming-up operation. Preheating automatically starts and preheating pilot lamp (2) illuminates. Preheating time in cold areas changes according to the water temperature when starting the engine. Automatic preheating is actuated when the cooling water temperature is less than -5°C (23°F). Preheating times are shown in the following table. 2-56 WA500-3LK Cooling Water Temperature Preheating Time Above -5°C° (23°F) 0 second -5°C (23°F) 20 seconds Below -20°C (-4°F) 40 seconds