OPERATION Changing Gear Speed When traveling at high speed, do not shift gear suddenly. Use the brake to reduce the travel speed before shifting gear. Shifting gear When shifting gear, move the gearshift lever (1) to the desired position. When carrying out digging and loading operations, 1st and 2nd gears are used. Use the gearshift lever stopper. Remark This machine is equipped with a kickdown switch that shifts the gear down to 1st if the button at the tip of the lift arm control lever is pushed when the machine is traveling in 2nd gear. We recommend the use of the kickdown switch when carrying out digging or loading operations in 1st or 2nd gear.
For details, see “Kickdown Switch” on page 2-22. If the gearshift lever is operated slowly or it is stopped between speed ranges, error code CALL may be displayed. This is not a failure; the gearshift lever must be operated to complete the gearshifting within two seconds. 2-66 WA500-3LK