Changing Direction OPERATION When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine. Be particularly careful when changing direction to travel in reverse. Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently and then change the direction of travel. (Maximum speed for changing direction: 12 km/h (7.5 mph)) There is no need to stop the machine even when switching between FORWARD and REVERSE. Place directional lever (1) in the desired position.
On machines equipped with auto-shift when switching between FORWARD and REVERSE, the machine starts automatically from 2nd speed. Manual Shift 3rd and 4th Speed and Automatic Shift When traveling in 3rd or 4th on manual shift machines (or at high speed on auto-shift machines) if you attempt to switch between FORWARD and REVERSE, the alarm buzzer sounds (rapid intermittent sound) for three seconds if the machine speed and engine speed are in Area I on the chart to the right. If you attempt to shift between FORWARD and REVERSE when the speed is in Area II, the alarm buzzer sounds and the transmission shifts to the speed range in the following table.
The speed is reduced and the deceleration is weaker than when the machine speed is in Area I. Remark If the directional lever is operated slowly or is stopped between directional range, error code CALL may be displayed. This is not a failure; operate the directional lever to complete the directional shifting within two seconds. WA500-3LK 2-67 Gear Speed before Changing between FORWARD and REVERSE Gear Speed after Changing between FORWARD and REVERSE F2 R3 F3 R3 or R4 F4 R3 or R4 R2 F3 R3 F3 or F4 R4 F3 or F4