OPERATION Stopping the Machine Avoid stopping suddenly. Allow ample room when stopping. Do not park the machine on a slope. If it is necessary to park the machine on a slope, stop the machine facing directly down the slope; fit blocks under the tires; and lower the bucket to the ground to prevent the machine from moving. If the work equipment control lever is accidentally touched, there is danger that the work equipment or machine may move suddenly and cause a serious accident. Before leaving the cab, always set the safety lock lever securely to the LOCK position. When the parking brake switch is turned ON, it is dangerous to release the brake pedal immediately.
Always keep the brake pedal depressed until the parking brake pilot lamp lights up. Remark Never use the parking brake switch to brake the machine when traveling, except in an emergency. Apply the parking brake only after the machine has stopped. 1. Release accelerator pedal (1) and then depress brake pedal (2) to stop the machine. 2. Place directional lever (3) in the N (neutral) position. 3. Turn parking brake switch (4) ON to apply the parking brake. Remark When the parking brake is applied, the transmission is automatically returned to neutral. 2-68 WA500-3LK