OPERATION When loading the dump truck, do not push forcibly with the bucket. The machine and the dump truck will suffer impact shock, resulting in damage. When pushing the load with the bucket to prevent rocks from falling, carry out the operation gently. When loading large rocks, first load with sand or soil to act as a cushion and then load the large rocks on top. If large rocks are loaded directly, they will cause deformation or damage to the dump body. 1. When loading the dump truck, load at a low point that does not hit the dump truck or dilution. 2. After completing the loading, if there is danger of rocks falling off, push the load softly with the bucket.
Reversing Away From Dump Truck Do not shift down with the accelerator pedal depressed (with the engine speed raised). If the transmission is shifted down when the engine speed is high, there will be an excessive load on the engine, torque converter, transmission, axles, final drive, and the whole power train. In addition, the tires will slip and cause wear of the tires. Do not operate the steering immediately after switching between forward and reverse (when the machine is stationary). If the steering is operated when the machine is stationary, it will cause wear or cuts to the tires. 2-82 WA500-3LK