Komatsu — Parking the Machine

OPERATION Parking the Machine Avoid stopping suddenly. Give yourself ample room when stopping. Do not park the machine on a slope. If the machine must be parked on a slope, set it facing directly down the slope; dig the bucket into the ground; and put blocks under the tires to prevent the machine from moving. If the control lever is touched by accident, the work equipment or the machine may move suddenly. This may lead to a serious accident. Before leaving the operator’s compartment, always set the safety lock lever securely to the LOCK position. When the parking brake switch is turned ON, it is dangerous to release the brake pedal immediately.

Always keep the brake pedal depressed until the parking brake pilot lamp illuminates. Remark Never use the parking brake switch to brake the machine when traveling, except in an emergency. Apply the parking brake only after the machine has stopped. 1. Release accelerator pedal (1) and then depress brake pedal (2) to stop the machine. 2. Place directional lever (3) in the N (neutral) position. 2-96 WA500-3LK