Komatsu — Lifting Procedure

Lifting Procedure OPERATION Lifting work can be carried out only for machines with hook mark labels (lifting marks). Before starting the lifting operation, stop the machine on level ground. Use the following procedure to set the machine in the proper posture and use the lifting equipment when lifting the machine. 1. Start the engine; make sure that the machine is horizontal; then set the work equipment to the travel posture. For details, see “Moving the Machine (Directional, Speed), Stopping the Machine” on page 2-63. (A): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 – 50 cm (16 – 20 in) 2. Move the work equipment safety lock lever to the LOCK position. 3.

Stop the engine; check that the area around the operator’s compartment is safe; then set the safety bar to the LOCK position so that the front frame and rear frame do not articulate. WA500-3LK 2-107