OPERATION 4. Use wire ropes, slings, spreader bars, and other lifting equipment that match the weight of the machine. Fit the lifting equipment to the lifting hooks (indicated by hook marks) at the front of the front frame and the rear of the rear frame. See “Lifting Position Marks” on page 2-106. Remark Use protectors, etc. so that the wire ropes do not break at sharp edges or narrow places. Use threaders and bars having sufficient width so that the slings and wire ropes do not touch the machine. For machines equipped with a rear full fender, remove the rear full fender before carrying out the operation. 5.
When the machine leaves the ground, stop the lifting operation for a moment and wait for the machine to stabilize. Make sure that the wire ropes are not slack and that the machine is level. If the wire ropes are taut and the machine is level, continue to lift the machine slowly. 2-108 WA500-3LK