MAINTENANCE WEAR PARTS Replace wear parts (such as the filter element, air cleaner element, bucket tooth, etc.) at the time of periodic maintenance or before they reach the wear limit. The wear parts should be replaced correctly in order to ensure more economical use of the machine. Always use Komatsu genuine parts of excellent quality. As a result of Komatsu’s continuous efforts to improve product quality, part numbers may change. When ordering parts, always inform your Komatsu distributor of your machine serial number so he can check for the latest part number. Wear Parts List The parts in parentheses are to be replaced at the same time.
3-10 WA500-3LK Item Part Name QTY Replacement Frequency Engine oil filter Cartridge 1 EVERY 500 HOURS Additional fuel filter Cartridge 1 Transmission oil filter Element (O-ring) (O-ring) 1 (4) (2) Fuel filter Cartridge 1 EVERY 1000 HOURS Corrosion resistor Cartridge 1 Hydraulic filter Element (O-ring) 1 (1) EVERY 2000 HOURS Air cleaner Element assembly 1 WHEN REQUIRED Outer element assembly 1 Air conditioner air filter Element 2 1-piece bucket tooth Tooth Bolt Nut Shim (0.5 mm) Shim (1.0 mm) 6 18 18 12 6 1-piece corner tooth Right corner tooth Left corner tooth Bolt Nut Washer Bolt Nut Shim (0.5 mm) Shim (1.0 mm) 1 1 2 2 2 4 4 4 2 Tip tooth Tooth Pin 8 8 Segment edge Edge Bolt Washer Nut 7 14 14 14