Komatsu — Recommended Brands, Other Than Komatsu Genuine Oil

Remark Use diesel fuel only. MAINTENANCE This engine uses an electronically controlled, high-pressure fuel injection system to obtain good fuel economy and low emissions. For this reason, it requires high-precision parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, the durability may drop markedly. Recommended Brands, Other Than Komatsu Genuine Oil When using commercially available oils other than Komatsu genuine oil, consult your Komatsu distributor. WA500-3LK 3-13 Note Explanation 1 Power train oil has different properties from engine oil. Be sure to use the recommended oil.

2 Axle oil AXO80 prevents squealing from the brakes and LSD (Limited Slip Differential). If only AX080 is recommended, use Komatsu genuine AX080 or equivalent. 3 When the ambient temperature is higher than 45°C (113°F) and the machine operation hour is longer than 12 hours/day, use E050-CD instead of AX080. Squealing of the brakes may occur with the use of E050-CD but there is no problem with the brake performance or durability. 4 If the machine is equipped with an automatic greasing system, see “AUTO-GREASING SYSTEM” on page 5-7. 5 Hypergrease (G2-T, G2-TE) is a high-performance grease.

When it is necessary to improve the lubricating ability of the grease in order to prevent squealing of pins and bushings, the use of G2-T or G2-TE is recommended. 6 Supercoolant (AF-NAC) • The coolant has the important function of preventing corrosion as well as preventing overheating and freezing. • Even in areas where freezing is not an issue, the use of antifreeze coolant is essential. • Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze, and cooling properties and can be used continuously for two years or 4000 hours. • Komatsu Supercoolant (AF-NAC) is strongly recommended wherever available.

• For details of the ratio when diluting super coolant with water, see “Clean Inside of Cooling System” on page 3- 24. • When the machine is shipped from the factory, it may be filled with coolant containing 30% or more Supercoolant (AF-NAC). In this case, no adjustment is needed for temperatures down to -10°C (14°F) (never dilute with water). • To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%.