MAINTENANCE Clean Element in Air Conditioner Recirculation Filter 1. Open filter inspection cover (1) and remove the filter cover (2). 2. Pull out filter (3) in the direction of the arrow. When removing the filter to the side, put your weight on the seat and push down. 3. Clean with compressed air in the same way as for the fresh air filter. For details, see “Clean Element in Air Conditioner Fresh Air Filter” on page 3-44. If the filter is extremely dirty, rinse it in water. 4. After rinsing the filter, dry it completely before installing it again. Lubricating 1. Using a grease pump, pump in grease through the grease fittings marked by the arrows. 2.
After greasing, wipe off any grease that was pushed out. 1. Bucket pin 4. Dump cylinder rod end 7. Dump cylinder bottom pin 2. Bucket link pin 5. Lift cylinder pin 8. Steering cylinder bottom pin 3. Tilt lever pin 6. Lift arm pivot pin 9. Steering cylinder rod end 3-50 WA500-3LK