Komatsu — Change Oil in Engine Oil Pan, Replace Engine Oil Filter Cartridge

Every 500 Hours Service MAINTENANCE Maintenance for every 50, 100, and 250 hours service should be performed at the same time. Change Oil in Engine Oil Pan, Replace Engine Oil Filter Cartridge The engine parts and oil are VERY HOT immediately after the engine is stopped and may cause serious burns. Wait for the temperature to cool down before starting the work. When removing the oil filler cap, turn it slowly to release internal pressure and then remove it. Required Container to catch engine oil Refill capacity:. . . . . . . . . . . . . . . . . . . . . . 37 liters (9.8 US gallons) Filter wrench 1. Stop the engine and wait for the temperature of all parts to go down. 2.

Open the engine side cover on the right side of the chassis. 3. Open oil filler (F). 4. Place a container under drain plug (P) to catch the oil. 5. Loosen drain plug (P) and drain the oil. 6. Check the drained oil. If there are excessive metal particles or foreign material, contact your Komatsu distributor. 7. Install drain plug (P). 8. Using the filter wrench, turn filter cartridge (1) counterclockwise to remove it. If this operation is carried out immediately after stopping the engine, a large amount of oil will come out. Wait for 10 minutes before starting the operation. 9. Clean the filter holder. 10.

Fill a new filter cartridge with clean engine oil; coat the seal portion and the threaded portion of the filter cartridge with engine oil. WA500-3LK 3-53