Komatsu — Change Oil in Engine Oil Pan, Replace Engine Oil Filter Cartridge

MAINTENANCE 11. Install the new filter cartridge to the filter holder. When installing the cartridge, bring the seal surface into contact with the filter holder and then tighten a further 3/4 to 1 turn by hand. If you use a filter wrench to tighten the filter, be careful not to scratch or deform the filter. 12. After replacing the filter cartridge, add engine oil through oil filler (F) until the oil level is between the H and L marks on the dipstick. 13. Run the engine for a short time at low idling. Stop the engine and check that the oil level is between the H and L lines on the dipstick. For details, see “Check Oil Level in Engine Oil Pan, Add Oil” on page 2-47. 3-54 WA500-3LK