Komatsu — Wash Fuel Tank Breather

Clean Radiator Subtank Breather MAINTENANCE 1. Remove all mud and dirt from around the breather. 2. Remove the breather. 3. Immerse the breather in cleaning fluid and clean it. Be careful not to let dirt enter through the mount while the breather is removed. Clean Fuel Strainer 1. Remove plug (1). 2. Remove the strainer together with the plug. 3. Remove the dirt stuck to the strainer and strainer case. 4. Wash the strainer with clean diesel oil or flushing oil. If the strainer is damaged, replace it with a new part. 5. Insert the strainer, then install plug (1). If the plug O-ring is damaged or deteriorated, replace it with a new part. Tightening torque for plug: . . . . . . . . . . . . . .

. 78.4 N•m (57.8 lbf ft) Wash Fuel Tank Breather 1. Stop the engine and wait for the temperature of all parts to go down. 2. Remove all mud and dirt from around the breather. 3. Remove the breather and fit a cover to the breather mounting hole to prevent dirt from entering. 4. Soak the breather in cleaning fluid and wash it. 5. Install the breather. WA500-3LK 3-63