Komatsu — Clean PPC Circuit Strainer

3. Stop the machine so that drain plug (4) of the final drive is at the bottom. MAINTENANCE 4. Remove oil filler plug (5) and drain plug (4) and drain the oil. 5. After draining the oil, clean drain plugs (2), (3), and (4) and then install them. 6. Add oil to the specified level through the oil filler ports (1) and (5) of the axle housing and left and right final drives. 7. After adding oil, check that the oil is at the specified level. For details, see “Check Axle Oil Level, Add Oil” on page 3- 30.

Replace Element in Air Conditioner Recirculation Air Filter, Fresh Air Filter Remove both the recirculation air filter and fresh air filter in the same manner as when performing the cleaning procedure. For details about cleaning the recirculation air filter, see “Clean Element in Air Conditioner Recirculation Filter” on page 3-50. For details about cleaning the fresh air filter, see “Clean Element in Air Conditioner Fresh Air Filter” on page 3-44. Replace both filters with new parts. Clean PPC Circuit Strainer After the engine is stopped, the parts and oil are VERY HOT and may cause burns. Wait for the temperature to go down before starting the operation. 1. Remove flange (1). 2.

Remove strainer case (2). 3. Take out the strainer and wash it in clean diesel oil. 4. Assemble the strainer to strainer case (2), then install with flange (1). WA500-3LK 3-69