TIRE CHAINS OPTIONS, ATTACHMENTS When installing tire chains you must be careful that there is sufficient clearance for the tire chain. Refer to “Clearance between Front Fender and Tire” on page 5-3 and “Clearance between Hydraulic Tank and Tire, between Platform and Tire” on page 5-4 before you install the chains. On job sites where there are boulders or sharp rocks, install tire protectors (mesh chain). Check the mesh chain for cuts or sagging before starting operation. Be careful not to let the tires and chain slip during operation. Clearance between Front Fender and Tire WA500-3LK 5-3 Unit:
mm Clearances Machine Model Tire Size A B C D E Tread WA500-3 Standard 26.5–25 1770 688 227 176 122 2400 Large diameter 29.5–25 1870 775 165 114 79 2400 Design standard 80 or more; 65 or more when using large diameter tires 80 or more; 65 or more when using large diameter tires