Komatsu — Adjusting Remote Positioner

OPTIONS, ATTACHMENTS Operating Remote Positioner 1. When RAISE/LOWER selector switch (1) is pressed, the system is turned ON; the stop display lamp lights up; and the remote positioner is set to the actuation condition. Remark Each time the RAISE/LOWER selector switch is pressed, the lighting of the display lamp changes as follows. RAISE ON/LOWER OFF RAISE OFF/LOWER ON RAISE ON/LOWER ON RAISE OFF/LOWER OFF 2. When RAISE stop display lamp (2) is illuminated and the boom control lever is moved from HOLD position (A) to RAISE position (B), the lever stops in that position.

When the lift arm rises to the RAISE stop set position, it reduces speed and stops and, at the same time, the control lever is returned to HOLD position (A). 3. When LOWER stop display lamp (3) is illuminated and the boom control lever is moved from HOLD position (A) to FLOAT position (C) or maximum LOWER position (D), and the lift arm goes down to the LOWER stop set position, it reduces speed and stops. If the lever is held in position, the lift arm is set to the STOP condition. Adjusting Remote Positioner When the lift arm has been removed or the setting does not work efficiently, contact your Komatsu distributor for adjustment. 5-16 WA500-3LK