Joystick Steering Lever OPTIONS, ATTACHMENTS This lever (1) is used to operate the bucket and lift arm. Operating Bucket Position (a): Dump Position (b): HOLD The bucket is kept in the same position. Position (c): Tilt If the lever is pulled further from the TILT position, the lever stops at that position. The bucket positioner is adjusted to that position and, at the same time, the lever returns to the HOLD position. Operating Lift Arm Position (a): RAISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Position (b):
HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. Remark Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling. See “Leveling Operations” on page 2-75. WA500-3LK 5-21