OPTIONS, ATTACHMENTS Kickdown Switch When the machine is traveling in F2 and the kickdown switch (2) on the head of the joystick is pressed, the transmission is shifted down to F1. Use this switch when you need to increase the drawbar pull in digging operations. Remark To cancel the kick-down switch, operate the directional lever to REVERSE or Neutral, or operate the gear shift lever to any position other than 2nd. You can also cancel kickdown by operating the parking brake switch or turning the starting switch OFF. Hold Switch To lock the speed range when traveling in automatic transmission, press the hold switch (3) at the side of the joystick knob.
The speed range displayed in the transmission indicator of the main monitor is held, and the HOLD display lights up. If the switch is pressed again, the setting is canceled and the display goes out. Use this system to set the desired speed range when traveling up or down hills or during grading operations. Remark It is possible to shift up or down from the fixed speed range by operating the gearshift lever. 5-22 WA500-3LK