Steering with Joystick Lever or Steering Wheel OPTIONS, ATTACHMENTS If the directional lever and FNR button on the joystick are not both at the neutral position, the forward and reverse directions of the transmission cannot be switched (from the directional lever to the FNR button on the joystick when the joystick ON/ OFF switch is ON, or from the FNR button on the joystick to the directional lever when the joystick ON/OFF switch is OFF). Do not use the joystick when traveling on public roads. Select joystick operation or steering wheel operation according to the type of work. Before using the joystick steering, read the precautions in “Precautions for Steering with Joystick” on page 5-24.
Steering Using Joystick This is suited for continuous loading operations on job sites with ample space, where the loading operation can be carried out with a comparatively relaxed cycle time. Because operations can be carried out with small movements and light operating effort, this is also suitable for reducing operator fatigue when operating continuously. Steering Using Steering Wheel This provides excellent fine control and ability to travel in a straight line. It is suitable for travel between job sites and for load-and-carry operations.
It is also suitable for short-cycle loading operations because the upper part of the operator’s body is supported by the steering wheel when frequently switching between FORWARD and REVERSE. WA500-3LK 5-23