Operating the Joystick Steering System OPTIONS, ATTACHMENTS It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills. Do not operate the steering in such conditions. When turning, the articulation stops at the position to which the steering wheel is turned. If the joystick is held in the tilted position, the body of the machine will articulate fully. The feel of steering with the joystick is different from when steering with the steering wheel. Be extremely careful until you have become used to operating the joystick.
When operating with joystick lever (4), always adjust the angle of the steering wheel so that it is possible to see the FNR display on the machine monitor. 1. Check the adjustment and operation before starting the engine. For details, see “Check Before Starting Engine” on page 2-109. 2. Before starting the engine, check the operation of the joystick lever steering; check that the transmission directional lever is at N; and that the surrounding area is safe. 3. Sit on the operator’s seat and pull up lever (1) to unlock the joystick console; slide the joystick console from the rear position to the forward stroke end; then lock it securely. Under this condition, safety switch (2) is turned on.
4. Adjust joystick (4) to the angle for easy operation with console box adjustment lever (3). For instructions about adjusting the joystick console, see “Adjustments” on page 5-28. 5. Fasten the seat belt. 6. Confirm that joystick (4) operates normally and the directional lever of the transmission is at the neutral position, then start the engine. 7. Turn on joystick ON/OFF switch (5). FNR button (6) on joystick (4) head is set to the neutral position automatically. WA500-3LK 5-25