Brake Oil Pressure Caution Pilot Lamp OPERATION The brake oil pressure caution pilot lamp (5) warns the operator that the brake oil pressure has dropped. When carrying out checks before starting: When the engine is stopped, the brake oil pressure circuit is not actuated; the caution pilot lamp and central CHECK lamp are also off. When operating: If the brake oil pressure goes down, the caution pilot lamp and the central CAUTION lamp will flash, and the alarm buzzer will sound intermittently. If the monitor lamps flash, stop the engine immediately and check the brake oil pressure circuit.
Remark The monitor lamp may flash and go out after approximately 10 seconds immediately after the engine is started. This is because pressure is being stored in the brake accumulator. This does not indicate an abnormality. Engine Oil Pressure Caution Pilot Lamp The engine oil pressure caution pilot lamp (6) warns the operator that the engine lubricating oil pressure has dropped. If this lamp flashes, stop the engine and check. Check before starting: Lights up. Engine started or running: When the engine is started, the lubrication pressure is formed and the lamp goes out.
If the engine lubrication pressure drops, the warning pilot lamp and the central CAUTION lamp will flash, and the buzzer will sound intermittently. Battery Charge Caution Pilot Lamp The battery charge caution pilot lamp (7) warns the operator that there is an abnormality in the charging system when the engine is running. Check before starting: Lights up. Engine started or running: When the engine is started, the alternator generates electricity and the lamp goes out. If any abnormality occurs in the charging system, the caution pilot lamp and the central CHECK lamp will flash. If they flash, check the charging circuit. WA500-3LK 2-11