Komatsu — Front Wiper Switch

OPERATION Hazard Lamp Switch Use the hazard lamps only for emergencies. Using the hazard lamps when traveling will cause problems for other machine operators. The hazard switch (8) is used in emergencies, such as when the machine breaks down and has to be parked on the road. ON position: All turn signal lamps flash. Remark When this switch is turned to the ON position, the turn direction indicator lamps and the turn indicator pilot lamp flash; the display lamp (A) lights up at the same time. Kickdown Switch When the gearshift lever is in 2nd and the kickdown switch (9) at the top of the knob of the lift arm control lever is pressed, the gear shifts down to 1st.

Use this when you need to increase the drawbar pull in digging operations. Remark To cancel the kickdown switch, move the directional lever to REVERSE or NEUTRAL, or operate the gearshift speed control lever to any position except 2nd. You can also cancel the kickdown switch by operating the parking brake switch or turning the starting switch OFF. Front Wiper Switch Turn rotary switch (A) of the front wiper switch (10) to operate the front wiper. If pushbutton (B) is pressed, washer fluid sprays onto the front glass while the button is pressed. Position (a): (OFF) Stop Position (b): (INT) Intermittent wiper Position (c): Low-speed wiper Position (d): High-speed wiper 2-22 WA500-3LK