Lamp Switch OPERATION The lamp switch (6) is used to light up the front lamps, side clearance lamps, tail lamps, and instrument panel. Position (a): OFF Position (b): Side clearance lamp, tail lamps, and instrument panel light up. Position (c): Headlamps light up in addition to lamps at position (b). Remark The lamp switch can be operated regardless of the position of the lever. Turn Signal Lever The turn signal lever (6) is used to operate the turn signal lamp. Position (a): LEFT TURN - Push lever FORWARD. Position (b): RIGHT TURN - Pull lever BACK. Remark When the lever is operated, the turn signal pilot lamp also flashes.
When the steering wheel is turned back, the lever automatically returns to its original position. If it does not return, return it manually. Dimmer Switch The dimmer switch (6) is used to switch the headlamps between high beam and low beam. Position (a): Low beam Position (b): High beam Horn Button The horn button (7) in the center of the steering wheel is used to sound the horn. WA500-3LK 2-21