Komatsu — Transmission Auto-Shift/Manual Selector Switch

OPERATION Front Working Lamp Switch Always turn the working lamp OFF before traveling on public roads. When turning on the front work lamp, turn the front working lamp switch to the ON position for the side clearance lamp or the ON position for the headlamp, then operate the switch (3). When the pilot lamp is pressed, it lights up and turns ON; if it is pressed again, the pilot lamp goes out and the working lamp is turned OFF. The working lamp does not light up if the lamp switch is not at the ON position for the side clearance lamp or the ON position for the headlamp. Rear Working Lamp Switch Always turn the working lamp off before traveling on public roads.

When turning on the rear working lamp, turn the rear working lamp switch to the ON position for the side clearance lamp or the ON position for the headlamp, then operate the switch (4). When the pilot lamp is pressed, it lights up and turns ON; if it is pressed again, the pilot lamp goes out and the working lamp is turned OFF. The working lamp does not light up if the lamp switch is not at the ON position for the side clearance lamp or the ON position for the headlamp. Transmission Auto-Shift/Manual Selector Switch Press the transmission auto-shift/manual selector pushbutton switch (5) to turn the system ON or OFF.

If the switch is pressed once, the pilot lamp lights up and the system is switched ON. If the switch is pressed again, the pilot lamp goes out and the system is switched OFF. Normally, set this switch to the OFF position. OFF: Transmission set to auto-shift ON: Transmission set to manual shift When the switch is at the ON position, the transmission AUTO-SHIFT/MANUAL selector pilot lamp lights up. Remark For details about the manual shift, see “Manual Shift” on page 2-27. For details about the auto-shift, see “Automatic Shift” on page 2-27. 2-20 WA500-3LK