Komatsu — Gearshift Lever

Gearshift Lever OPERATION The gearshift lever (1) changes the speed range of the transmission. Manual Shift This machine has a 4-FORWARD, 4-REVERSE speed transmission. Place the gearshift lever in a suitable position to obtain the desired speed range. 1st and 2nd speeds are used for working. 3rd and 4th speeds are used for traveling. When the gearshift lever stopper is used, it is impossible to shift to 3rd or 4th. Disengage the gearshift lever stopper before trying to shift gears. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th Remark The length of the lever can be adjusted to three stages (positions (A), (B), or (C)).

To adjust the length, remove the screw at the bottom of the lever knob; slide the knob to the desired position; then tighten the screw again. (The lever is installed to position (B) when shipped from the factory.) Automatic Shift Automatic gearshifting can be carried out in 2nd, 3rd, or 4th speed range of the four forward and reverse speeds, depending on the travel conditions. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th WA500-3LK 2-27