Brake Pedals OPERATION When traveling downhill, always use the right brake pedal. Use the braking force of the engine together with the brake. Do not use the brake pedal more than necessary. If the brake is used too frequently, the brake will overheat. If this happens, the brakes will not work and may lead to a serious accident. Do not put your foot on the brake pedal unless necessary. The brake pedals (7) operate the brakes. Right Brake Pedal The right brake pedal operates the wheel brakes. Use the right brake pedal for normal braking operations. Left Brake Pedal The left brake pedal operates the wheel brakes.
When the transmission cutoff switch is in the ON position and if the left brake pedal is depressed, wheel brakes are applied and the transmission is set to the neutral position at the same time. If the transmission cutoff switch is at OFF, the left brake pedal acts in the same manner as the right brake pedal. Remark When the accelerator is being used for operating the work equipment, always set the transmission cutoff switch to the ON position and use the left brake pedal to slow or stop the machine. Accelerator Pedal The accelerator pedal (8) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed. WA500-3LK 2-31