OPERATION SECURITY LOCKS AND SAFETY FEATURES This machine is equipped with several security locks and safety features designed to protect the operator, persons performing service, repair, or inspections on the machine, as well as the general public when the machine is not in use and unattended. It is important for the operator of the machine to know where these features are located and when to use them. Failure to do so may result in damage to the machine or injury to personnel. Steering Column Tilt Lever Stop the machine before adjusting the tilt of the steering wheel.
If this operation (adjustment) is carried out while the machine is moving, it may lead to a serious accident or personal injury. The steering column tilt lever is used to tilt the steering column forward or backward. Pull the lever up and move the steering wheel to the desired position. Push the lever down to lock the steering wheel in position. Adjustment range: . . . . . . . . . . . . . . . . . 125 mm (4.9 in) (stepless) Cap with Lock This machine is equipped with cap locks for the following ports: Subtank filler port Fuel tank filler port Hydraulic tank filler port (if equipped) Transmission filler port (if equipped). Use the starting switch key to open or close the caps.
Opening the Cap 1. Insert the starting switch key into the cap securely until the shoulder contacts the keyhole. If the key is turned before it is inserted fully into the keyhole, the key may break. 2-32 WA500-3LK