Komatsu — GREASE PUMP

. OPERATION DETAILED CONTROLS AND GAUGES first grease includes air inside the pump, so it is REMARK Keep spare grease in grease can storage location in the grease pump chamber. 3 - 73 Supplying Grease 1. Remove bolts (2) at 2 places, bracket (1). 2. Remove wing bolts (4) of g remove cover (5) together wi 3. Remove follow plate (6) insid Place follow plate (6) flat hand to push it into the gre comes out from the packi plate (6). 1. Remove bolts (2) at 2 places, then remove grease pump holder bracket (1). Remove wing bolts (4) of g rease can (3) at 3 places, then th the grease pump. e the grease can. on top of the grease, use your 2. remove cover (5) together wi 3.

Remove follow plate (6) insid Place follow plate (6) flat ase, and push down until grease ng portion in the center of follow 4. Fill the grease can with new g top of the grease. When putting follow plate ( hollow in the center of the f the operation to be carried 5. Insert the grease pump into th follow plate (6), set cover (5) wing bolts (4) uniformly to ho 6. After fitting grease pump hold grease pump, install with 2 b 4. Fill the grease can with new g rease, then set follow plate (6) on top of the grease. When putting follow plate ( 6) on top of the grease, first fill the ollow plate with grease to enable 5.

Insert the grease pump into th e packing portion at the center of follow plate (6), set cover (5) on grease can (3), then tighten 3 wing bolts (4) uniformly to ho 6. After fitting grease pump hold er bracket (1) into the head of the grease pump, install with 2 b The pump will operate for a sh cloudy white and not suitable f 7. Loosen check valve (7), and p air in it from hole (a) at the bo 8. After bleeding the air, close c 9. After bleeding air from inside gun to completely discharge the hose and grease gun. When filling with grease, b or dirt stick to follow plate grease pump.

If there is ample grease, b any grease, follow plate position, so correctly set it The standard grease can con 20-liter (5.28 US gal) can is us cloudy white and not suitable f 7. Loosen check valve (7), and p ump out all the grease which has air in it from hole (a) at the bo 8. After bleeding the air, close c 9. After bleeding air from inside the pump, pull lever of the grease gun to completely discharge grease mixed with air from inside the hose and grease gun. When filling with grease, b e extremely careful not to let sand The standard grease can con tains 18 liters (4.76 US gal). If a 20-liter (5.28 US gal) can is us ed, there will be more grease left.