Komatsu — DISCHARGED BATTERY

. OPERATION TROUBLES AND ACTIONS Starting Engine with Booster Cables When starting the engine with a booster cable, do as follows. Connecting and Disconnecting Booster Cables WARNING booster cable, always wear safety structure frame), a spark will be spot as far away from the battery as exercise good care so that the each other, or they contact the 3 - 155 When connecting the cables, neve (-) terminals. When starting the engine with a glasses. Be careful not to let the normal m each other. This prevents sparks fr could ignite the hydrogen gas giv explodes, it could cause serious i Be careful not to make a mistake the last connection (to the upp caused, connect the cable to a s possible.

(Avoid the work equipme conductor) When removing the booster cab booster cable clips may not con chassis. NOTICE The starting system for this mach ine uses 24V. For the normal machine, als o use The size of the booster cable and clip should be suitable for the battry size. The battery of the normal machine must be the same capacity as that of the Check the cables and clips for da Make sure that the cables and clip Check that the lock levers and par king brake levers of both machine are in t Check that each lever is in the NE Booster Cable Connection Keep the starting switch of the machine in the OFF position.

normal machine and problem lows, in the order of the numbers hes of the normal machine and the OFF position. r cable (A) to the positive (+) ine. ster cable (A) to the positive (+) ne. cable (B) to the negative (-) terminal of the normal machine. ster cable (B) to the upper structure frame of the problem machine. Connect the booster cable as fol marked in the diagram. 1. Make sure the starting switc problem machine are both at 2. Connect one clip of booste terminal of the problem mach 3. Connect the other clip of boo terminal of the normal machi 4. Connect one clip of booster 5. Connect the other clip of boo 4.

Connect one clip of booster cable (B) to the negative (-) terminal o f the normal machine. 5. Connect the other clip of boo ster cable (B) to the upper structure fr ame of the problem m