. OPERATION TROUBLES AND ACTIONS Starting the Engine CAUTION 3 - 156 Always c heck t hat the lock le ver is set to the LOCK position, regardless of whether the machine is working normally or ha s failed. Check al so tha t all the contro l levers are at the HO LD or neutral p 1. Mak e sur e the clips a re firmly connected to the battery terminals 2. Star t engine of the no rmal machine and r un it at high i dle s peed. 3. Tur n the starting switc h of the problem m achine to the START position and start t If th e engine doesn't s tart at first, try agai n after 2 minutes or so.
Booster Cable Disconnect After th e engine has start ed, disconnect the b ooster cable s in the reverse of the order in wh ich they were conn ected. 1. Remove one clip of bo oster cable (B) from the engine bloc k of the problem machine. 2. Remove t he other clip of booster cable (B) from the negative (-) terminal o f the normal machine. booster cable (A) f machine. rom the positive (+) 3. Remove on e clip of terminal o f the normal 4. Remove t he other clip of booster cable (A) from the positive (+) terminal o f the proble