Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE OUTLINE OF SERVICE HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC 4 - 4 Oil Oil is used in the engine and hyd raulic equipment under extremely severe conditions (high temperature, high se. pressure), and deteriorates with u Always use oil that matches the g Even if the oil is not dirty, always rade and temperature for use given in the Operation and Mainte nance Manual. change the oil after the specified interval. Oil corresponds to blood in the hu man body, always be careful when handling it to prevent any im purities (water, metal particles, dirt, etc.) from get The majority of problems with the Take particular care not to let any ting in.

machine are caused by the entry of such impurities. impurities get in when storing or adding oil. or brands. of oil. l are both causes of problems. Never mix oils of different grades Always add the specified amount Having too much oil or too little oi If the oil in the work equipment is not clear, there is probably water or air getting into the circuit. In such cases, please contact your Komatsu dist ributor. When changing the oil, always re place the related filters. In particular, when replacing the engine oil filter, fill the new filter with fresh, clean specifi ed oil before installing. lysis made of the oil periodically to check the condition of the machine.

For e, please contact your Komatsu distributor. We recommend you have an ana those who wish to use this servic At the time of shipping from the fa ctory, SAE1OWCD is used for hydraulic type o f oil. When HO4 6-hydraulic oil is going to be used, change spec by Komatsu can cause clogging cylinders will not be a problem ev ified amount of oil (whole amount). The hydrauli c oil that is not recommended of oil filter, so do not use it. The portion of the o Fuel ument, and if fuel containing water or dirt is used, it cannot work properly. purities get in when storing or adding fuel. he Operation and Maintenance Manual.

The fuel pump is a precision instr ument, and if fuel containing water or dirt is use d, it cannot wor Be extremely careful not to let im Always use the fuel specified in t Fuel may congeal depending on t °F)). It is necessary to use the fue he temperature when it is used (particularly in lo w temperature below -15°C (5 l that is suitable for the temperature. To prevent the moisture in the air from condensing and forming water inside the fu el tank, always f ill the fuel tank after completing the day's work. Before starting the engine, or whe n 10 minutes have passed after adding fuel, drai n the sediment and water from the fuel tank.

If the engine runs out of fuel, or if the filters have been replaced, it is necessary t o bleed the air f rom the circuit. Cooling System Coolant River water contains large amount of calcium and other impurities, so if it is used, s cale will stick to the engine and radiator, and this will cause defec Do not use water that is not suita tive heat exchange and overheating. ble for drinking. serve the precautions given in the Operation and Maintenance Manual. When using antifreeze, always ob serve the precautions given in the Operation a nd Maintenance Komatsu machines are supplied with Komatsu original anti-freeze in the coolant when the machi ne is shipped.

This anti-freeze is effective in pre The anti-freeze can be used conti hot areas. venting corrosion of the cooling system. nuously for two years or 4000 hours. Therefore , it can be used as it is even in tremely careful not to expose it to flame or fire. Antifreeze is flammable, so be ex