Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE analyzer to other metal wear measurer to measure the quantity of iron particles of 5 µ m or more, enabling early detection of failures. 4 - 5 The proportion of anti-freeze to water differs a ccording to the ambient temperature. NG SYSTEM (PAGE 4-24)". nt. For details of t he mixing proportions, see "CL EAN INSIDE OF COOLI If the engine o verheats, wait for the engine to cool before adding coola If the coolant le vel is low, it will cause overheat ing, and will also cause p roblems with corros ion due to air entering the coolant. Grease to prevent seizure and noises at the joints.

Grease is used to prevent seizure and noises The nipples no t included in the MAINTENANC E section are nipples use d when overhaulin g, so they do not need grease. If any part bec omes stiff or generates noise after being used for a long time, grease it. f all of the old grease that is pushed out when greasing. omes stiff or generates noise a fter being used for a long Always wipe of f all of the old grease that is pu shed out when greasing Be particularly wear of the rot careful to wipe off the old grea se in places where sand or dirt sticking in th e grease wou ld cause ating parts.

Carrying Out KOWA (Komatsu Oil Wear A nalysis) KOWA is a maint enance service that makes it po ssible to prevent machin e failures and down time. With KO WA, the oil is periodically s ampled and analyzed. This en ables early detection of w ear of the machine drive parts a nd other problems. We strongly reco mmend you to use this service. The oil analysis is carried out at actual cost, so the cost is low, and the results of the analysis are reported together with recommendations wh ich will reduce rep air costs and machine downtime.

KOWA Analysis It ems Measurement of density of metal wear particl This uses an measure the d particles in the ICP (Inductively Coupled Pla ensity of iron, copper, and oil. Measurement of quantity of particles PQI (Particle Quantifier Ind Others Measurements fuel in the oil, a are made of items such as th e ratio of water in the oil, density of the antifr eeze coolan t, ratio of nd dynamic viscosity, enabling a highly precise diagnos is of the machine's health.