Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE Adjustment WARNING Loosening Track Tension WARNING adjust it again. 4 - 30 There is d anger of plug (1) flying out under the high intern al pressure of the grease. Never loo sen plug (1) m ore than 1 t Never loo sen any part other than plug (1). Never put your face i n the mounting direction of pl ug (1). matsu distributor. If the trac k tension cannot be loos ened with the procedure given here, please contact your Ko matsu distribut Increasing Track Tension Prepare a grease pump. alve (1) using a grease gun. Prepare 1. Pum 2. To c forw 3. Che adju 1. Pum p in grease through v alve (1) using a greas e gun heck that the tension i ard and in reverse.

s correct, move the machine slowly 3. Che ck the track tension ag ain, and if the tension is not correct, st it again. 4. Cont inue to pump in greas e until (A) becomes 14 8 mm (5.8 in). tension is still loose, t he pin and bushing ar e excessively , so they must be eith er turned or replaced. Contact y our atsu distributor for rep It is extre mely dangerous to relea se the grease by any met hod e xcept the procedure given bel If track te nsion is not relieved by t his procedure, contact y our K omats u distributor for repairs. 1. Loos en plug (1) gradually to release the grease. 2. Turn plug (1) a maximum 3.

If the forw grease does not com ards and backwards a e out smoothly, move the machine short distance. 4. Tight en plug (1). 5. To c heck that the tension i s correct, move the m achin e slowly forw 6. Che ard. ck the track tension again, and if the tension is not correct,