Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE ADJUST BUCKET CLEARANCE WARNING 4 - 32 3. push in pin (1) partially by hand, then lock it with a hamme r to install the tooth to the b It is dangerous if the work equip ment is mistakenly moved w hen adjusting the bucket clearance. Set t he work equipment in a sta ble condition, stop the engine , then set l ock leve r (1) securely to the LOCK position (L). If there is excessive free pla y on the coupling section o f the bucket and arm, adjust the bucket clearance in the following manner. 1. 2. 3. 1.

Set the work equipment in the position shown in the diagram on the engine and set the lock lever to the lts (3), plate (1) and plate (5). valent in size to free play (a). lever the 2. Loosen 3 bolts (2), 6 bo lts (3), plate (1) and plate 3. Take out shims (4) equi valent in size to free play Thickness of shim (4) is 0.5 mm or 1.0 mm (0.02 or 0.04 in ). When free play (a) is l ess than a thickness of shim, do not tightening bolt (2). 6 bolts (3). him, not compress the shims by 4. Tighten 3 bolts (2) and Wit h this adjustment, cleara nce (b) becomes larger, b ut play ( a) is