Komatsu — EVERY 250 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE EVERY 250 HOURS MAINTENANCE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 47 Maintenan ce for eve ry 10 hour s servic e shoul d be carrie d out at the same time The part s and oil are at high tem perature immediately after t he engine is stopped , and may cause serious burns. W ait fo r the temperat ure to go do wn before starting t he operation. If there i s still pressu re remaini ng inside the case , the oil or plug may fly out. Loosen t he plug slo wly to relea se the pre Prepare a handle. 1. Set th e TOP ma with perpendicular to the groun d surfac 2.

Using a handle, r emove plu g (F) an d check that the oil level i within a range of 10 mm (0 .4 in) be low the bottom ed ge of the plug h 3. If the o il level is l ow, check again. I nstall p lug (F), op erate the travel l ever, trave l in FORWARD or REVERSE, and rotate the sprock et one tur n. Perform inspect ion for Procedure 2 again 4. If the o il level is l ow, add e ngine oil throug h plug hol e (F) unti the oil overflows from plug hole (F) 5. After c hecking, in stall plug (F).