. MAINTENANCE MAINTENANCE PROCEDURE WARNING doctor. above the UPPER LEVEL line. If the 4 - 48 CHECK LEVEL OF BATTERY ELECTROLYT Carry out thi s procedure before operating the ma Do not use the battery if the batt ery electrolyte level i s below the LOWER LEVEL line. Thi s will accelerat e deterioration of e battery and reduce the service life of th e battery. In a ddition , it may cause a n explosion. The battery generates flammabl e gas an d there is da nger of explosion, d o not bring fire or sparks near t he battery Battery ele ctrolyte is dangerous .
If it get s in your eye s or on your skin, w ash it off with a large amount of water an d cons When addi level is too high, it m ay leak a nd cause da mage to the paint s urface or corrod NOTICE If there is a fea r that the battery wate r may freeze after refi lling with purified wa ter (e.g. comme rcially available replenishment w for a battery), do the replenishmen t before the day's wo rk on the nex t day. Inspect the b attery electrolyte l evel at l east once a month an d follo w the basic saf ety procedure s given below.
Open cover the machin are installed When Checking Electrolyte Level from Side of Batt If it is possib le to check the ele ctrolyte level from the side of t he bat tery, check as 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. et cloth to clean th d check that the e area around the electrolyte electrolyte level is between LEVEL (U.L.) and ttery is wiped with LOWER LEVEL (L .L.) lines.